82598EB Datasheet, PDF (495/596 Pages) Intel Corporation – Intel® 82598EB 10 Gigabit Ethernet Controller Datasheet

Intel^® 82598EB 10 GbE Controller - NC-SI Support
1..15
16
17
18
19
20..23
24
25
26
27
28..31
Reserved
IPv4 Filter 0
Valid
IPv4 Filter 1
Valid
IPv4 Filter 2
Valid
IPv4 Filter 3
Valid
Reserved
IPv6 Filter 0
Valid
IPv6 Filter 1
Valid
IPv6 Filter 2
Valid
IPv6 Filter 3
Valid
Reserved
Indicates if the IPv4 address configured
in IPv4 address 0 is valid.
Indicates if the IPv4 address configured
in IPv4 address 1 is valid.
Indicates if the IPv4 address configured
in IPv4 address 2 is valid.
Indicates if the IPv4 address configured
in IPv4 address 3 is valid.
0b
Note: The network controller automatically sets
this bit to 1b if the Set Intel Filter – IPv4 Filter
Command is used for filter zero.
0b
Note: The network controller automatically sets
this bit to 1b if the Set Intel Filter – IPv4 Filter
Command is used for filter one.
0b
Note: The network controller automatically sets
this bit to 1b if the Set Intel Filter – IPv4 Filter
Command is used for filter two.
0b
Note: The network controller automatically sets
this bit to 1b if the Set Intel Filter – IPv4 Filter
Command is used for filter three.
Indicates if the IPv6 address configured
in IPv6 address 0 is valid.
Indicates if the IPv6 address configured
in IPv6 address 1 is valid.
Indicates if the IPv6 address configured
in IPv6 address 2 is valid.
Indicates if the IPv6 address configured
in IPv6 address 3 is valid.
0b
Note: The network controller automatically sets
this bit to 1b if the Set Intel Filter – IPv6 Filter
Command is used for filter zero.
0b
Note: The network controller automatically sets
this bit to 1b if the Set Intel Filter – IPv6 Filter
Command is used for filter one.
0b
Note: The network controller automatically sets
this bit to 1b if the Set Intel Filter – IPv6 Filter
Command is used for filter two.
0b
Note: The network controller automatically sets
this bit to 1b if the Set Intel Filter – IPv6 Filter
Command is used for filter three.
495