HD64F3048VTF8 Datasheet, PDF (484/903 Pages) Renesas Technology Corp – Hardware Manual Renesas 8-Bit Single-Chip

Section 13 Serial Communication Interface
 Synchronous mode
Serial data communication is synchronized with a clock signal. The SCI can communicate
with other chips having a synchronous communication function. There is one serial data
communication format.
• Data length: 8 bits
• Receive error detection: overrun errors
• Full duplex communication
The transmitting and receiving sections are independent, so the SCI can transmit and receive
simultaneously. The transmitting and receiving sections are both double-buffered, so serial
data can be transmitted and received continuously.
• Built-in baud rate generator with selectable bit rates
• Selectable transmit/receive clock sources: internal clock from baud rate generator, or external
clock from the SCK pin.
• Four types of interrupts
Transmit-data-empty, transmit-end, receive-data-full, and receive-error interrupts are requested
independently. The transmit-data-empty and receive-data-full interrupts from SCI0 can
activate the DMA controller (DMAC) to transfer data.
Rev. 3.00 Sep 27, 2006 page 456 of 872
REJ09B0325-0300