HD64F3048VTF8 Datasheet, PDF (479/903 Pages) Renesas Technology Corp – Hardware Manual Renesas 8-Bit Single-Chip

Section 12 Watchdog Timer
12.3.4 Timing of Setting of Watchdog Timer Reset Bit (WRST)
The WRST bit in RSTCSR is valid when bits WT/IT and TME are both set to 1 in TCSR.
Figure 12.7 shows the timing of setting of WRST and the internal reset timing. The WRST bit is
set to 1 when TCNT overflows and OVF is set to 1. At the same time an internal reset signal is
generated for the entire chip. This internal reset signal clears OVF to 0, but the WRST bit remains
set to 1. The reset routine must therefore clear the WRST bit.
φ
TCNT
H'FF
H'00
Overflow signal
OVF
WDT internal
reset
WRST
Figure 12.7 Timing of Setting of WRST Bit and Internal Reset
Rev. 3.00 Sep 27, 2006 page 451 of 872
REJ09B0325-0300