HD64F3048VTF8 Datasheet, PDF (244/903 Pages) Renesas Technology Corp – Hardware Manual Renesas 8-Bit Single-Chip

Section 8 DMA Controller
Bit 3—Data Transfer Interrupt Enable (DTIE): Enables or disables the CPU interrupt (DEND)
requested when the DTE bit is cleared to 0.
Bit 3: DTIE
0
1
Description
The DEND interrupt requested by DTE is disabled
The DEND interrupt requested by DTE is enabled
(Initial value)
Bits 2 and 1—Data Transfer Select 2A and 1A (DTS2A, DTS1A): A channel operates in full
address mode when DTS2A and DTS1A are both set to 1.
Bit 0—Data Transfer Select 0A (DTS0A): Selects normal mode or block transfer mode.
Bit 0: DTS0A
0
1
Description
Normal mode
Block transfer mode
(Initial value)
Operations in these modes are described in sections 8.4.5, Normal Mode, and 8.4.6, Block
Transfer Mode.
Rev. 3.00 Sep 27, 2006 page 216 of 872
REJ09B0325-0300