SH7014 Datasheet, PDF (314/754 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

10. Multifunction Timer Pulse Unit (MTU)
(6) Operation when Error Occurs during PWM Mode 1 Operation, and Operation is
Restarted in PWM Mode 1: Figure 10.65 shows an explanatory diagram of the case where an
error occurs in PWM mode 1 and operation is restarted in PWM mode 1 after re-setting.
1
2
RESET TMDR
(PWM1)
MTU output
TIOC*A
3
TIOR
(1 init
0 out)
4
5
PFC TSTR
(MTU) (1)
6
7
8
9
10 11
Match Error PFC TSTR TMDR TIOR
occurs (PORT) (0) (PWM1) (1 init
0 out)
12 13
PFC TSTR
(MTU) (1)
TIOC*B
• Not initialized (TIOC*B)
• Not initialized (TIOC*B)
Port output
PEn
Hi-Z
PEn
Hi-Z
Note: n = 0 to 15
Figure 10.65 Error Occurrence in PWM Mode 1, Recovery in PWM Mode 1
1 to 9 are the same as in figure 10.64.
10. Not necessary when restarting in PWM mode 1.
11. Initialize the pins with TIOR. (In PWM mode 1, the TIOC*B side is not initialized.)
12. Set MTU output with the PFC.
13. Operation is restarted by TSTR.
Rev.5.00 Sep. 27, 2007 Page 280 of 716
REJ09B0398-0500