SH7014 Datasheet, PDF (253/754 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

10. Multifunction Timer Pulse Unit (MTU)
Bit 2⎯Input Capture/Output Compare Flag C (TGFC): This status flag indicates the
occurrence of a Channel 0 TGRC register input capture or compare-match.
This bit is reserved for channels 1 and 2. It always reads as 0. The write value should always be 0.
Bit 2
TGFC
0
1
Description
Clear condition:
With TGFC = 1, a 0 write to TGFC following a read
(initial value)
Set conditions:
• When TGRC is functioning as an output compare register
(TCNT = TGRC)
• When TGRC is functioning as input capture (the TCNT value is sent
to TGRC by the input capture signal)
Bit 1⎯Input Capture/Output Compare Flag B (TGFB): This status flag indicates the
occurrence of a TGRB register input capture or compare-match.
Bit 1
TGFB
0
1
Description
Clear condition: With TGFB = 1, a 0 write to TGFB following a read
(initial value)
Set conditions:
• When TGRB is functioning as an output compare register
(TCNT = TGRB)
• When TGRB is functioning as input capture (the TCNT value is sent
to TGRB by the input capture signal)
Rev.5.00 Sep. 27, 2007 Page 219 of 716
REJ09B0398-0500