HD6417727BP160CV Datasheet, PDF (326/1098 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family/ SH7700 Series

Section 10 On-Chip Oscillation Circuits
Bits 14, 3 and 2—Internal Clock Frequency Division Ratio (IFC2, IFC1, IFC0): These bits
specify the frequency division ratio of the internal clock with respect to the output frequency of
PLL circuit 1.
Bit 14: IFC2 Bit 3: IFC1
Bit 2: IFC0
Description
0
0
0
×1
0
0
1
× 1/2
1
0
0
× 1/3
0
1
0
× 1/4
Values other than above
Reserved (illegal setting)
Note: Do not set the internal clock frequency lower than the CKIO frequency.
(Initial value)
Bits 13, 1 and 0—Peripheral Clock Frequency Division Ratio (PFC2, PFC1, PFC0): These
bits specify the division ratio of the peripheral clock frequency with respect to the frequency of the
output frequency of PLL circuit 1 or the frequency of the CKIO pin.
Bit 13: PFC2 Bit 1: PFC1
Bit 0: PFC0
Description
0
0
0
×1
0
0
1
× 1/2
1
0
0
× 1/3
0
1
0
× 1/4
1
0
1
× 1/6
(Initial value)
Values other than above
Reserved (illegal setting)
Note: Do not set the peripheral clock frequency higher than the frequency of the CKIO pin.
Bits 12 to 9, 7 and 6—Reserved: These bits are always read as 0. The write value should always
be 0.
Bit 8—Reserved: This bit is always read as 1. The write value should always be 1.
Rev.6.00 Mar. 27, 2009 Page 268 of 1036
REJ09B0254-0600