TCI6636K2H Datasheet, PDF (270/362 Pages) Texas Instruments – Multicore DSP+ARM KeyStone II System-on-Chip (SoC)

TCI6636K2H
Multicore DSP+ARM KeyStone II System-on-Chip (SoC)
SPRS835F—October 2013
10 TCI6636K2H Peripheral Information and Electrical Specifications
This chapter covers the various peripherals on the TCI6636K2H device. Peripheral-specific information, timing
diagrams, electrical specifications, and register memory maps are described in this chapter.
10.1 Recommended Clock and Control Signal Transition Behavior
All clocks and control signals must transition between V_IH and V_IL (or between V_IL and V_IH) in a monotonic
manner.
10.2 Power Supplies
The following sections describe the proper power-supply sequencing and timing needed to properly power on the
TCI6636K2H. The various power supply rails and their primary functions are listed in Table 10-1.
Table 10-1 Power Supply Rails on the TCI6636K2H
Name
Primary Function
AVDDAx
Core PLL, DDR3 DLL supply voltage
CVDD
SmartReflex DSP core supply voltage
CVDD1
DSP core fixed supply voltage
CVDDT1
ARM core fixed supply voltage
DVDD15
DDR3A, DDR3B I/O power supply voltage
DVDD18
1.8-V I/O power supply voltage
DVDD33
USB 3.3-V IO supply
VDDAHV
SerDes I/O power supply voltage
VDDALV
SerDes analog power supply voltage
VDDUSB
USB LV PHY power supply voltage
VP, VPTX
Filtered 0.85-V supply voltage
VSS
Ground
End of Table 10-1
Voltage
1.8 V
0.8 - 1.1 V
0.95 V
0.95 V
1.5 V
1.8 V
3.3 V
1.8 V
0.85 V
0.85 V
0.85 V
GND
Notes
Core PLL, DDR3 DLL supply
DSP variable core supply
DSP Core fixed supply
ARM core fixed supply
DDR3A, DDR3B I/O power supply
1.8-V I/O power supply
USB high voltage supply
SerDes I/O power supply
SerDes analog supply
USB LV PHY supply
Filtered 0.85-V USB supply
Ground
270 TCI6636K2H Peripheral Information and Electrical Specifications
Copyright 2013 Texas Instruments Incorporated
Submit Documentation Feedback