English
Language : 

TCI6636K2H Datasheet, PDF (247/362 Pages) Texas Instruments – Multicore DSP+ARM KeyStone II System-on-Chip (SoC)
TCI6636K2H
Multicore DSP+ARM KeyStone II System-on-Chip (SoC)
SPRS835F—October 2013
Table 8-41 IPC Generation Registers Field Descriptions
Bit Field
31-4 SRCSx
3-1 Reserved
0
IPCG
End of Table 8-41
Description
Reads return current value of internal register bit.
Writes:
0 = No effect
1 = Sets both SRCSx and the corresponding SRCCx.
Reserved
Reads return 0.
Writes:
0 = No effect
1 = Creates an inter-DSP/ARM interrupt.
8.2.3.13 IPC Acknowledgement (IPCARx) Registers
The IPCARx registers facilitate inter-CorePac interrupt acknowledgement.
The TCI6636K2H has twelve IPCARx (IPCAR0 through IPCAR11) registers. These registers also provide a Source
ID facility by which up to 28 different sources of interrupts can be identified. Allocation of source bits to source
processor and meaning is entirely based on software convention. The register field descriptions are given in the
following tables. Virtually anything can be a source for these registers as this is completely controlled by software.
Any master that has access to BOOTCFG module space can write to these registers. The IPC Acknowledgement
Register is shown in the following figure and table.
Figure 8-24 IPC Acknowledgement Registers (IPCARx)
31
30
29
28 27
87
6
5
43
0
SRCC27 SRCC26 SRCC25 SRCC24
SRCC23 – SRCC4
SRCC3 SRCC2 SRCC1 SRCC0
Reserved
RW +0 RW +0 RW +0 RW +0
RW +0 (per bit field)
RW +0 RW +0 RW +0 RW +0
R-0000
Legend: R = Read only; RW = Read/Write; -n = value after reset
Table 8-42 IPC Acknowledgement Registers Field Descriptions
Bit Field
31-4 SRCCx
3-0 Reserved
End of Table 8-42
Description
Reads return current value of internal register bit.
Writes:
0 = No effect
1 = Clears both SRCCx and the corresponding SRCSx
Reserved
8.2.3.14 IPC Generation Host (IPCGRH) Register
The IPCGRH register facilitates interrupts to external hosts. Operation and use of the IPCGRH register is the same
as for other IPCGR registers. The interrupt output pulse created by the IPCGRH register appears on device pin
HOUT.
Copyright 2013 Texas Instruments Incorporated
Submit Documentation Feedback
Device Boot and Configuration 247