SH7710 Datasheet, PDF (739/996 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Initial
Bit
Bit Name Value
11 to 8 POST293 to All 0
POST290
7 to 4 POST303 to All 0
POST300
3 to 0 POST313 to All 0
POST310
Section 18 Ethernet Controller (EtherC)
R/W Description
R/W These bits set the conditions for referring to the CAM
entry table 29. By setting multiple bits to 1, multiple
conditions can be selected.
POST293: The CAM entry table 29 is referred in port
0 reception.
POST292: The CAM entry table 29 is referred in port
0 to 1 relay.
POST291: The CAM entry table 29 is referred in port
1 reception.
POST290: The CAM entry table 29 is referred in port
1 to 0 relay.
R/W These bits set the conditions for referring to the CAM
entry table 30. By setting multiple bits to 1, multiple
conditions can be selected.
POST303: The CAM entry table 30 is referred in port
0 reception.
POST302: The CAM entry table 30 is referred in port
0 to 1 relay.
POST301: The CAM entry table 30 is referred in port
1 reception.
POST300: The CAM entry table 30 is referred in port
1 to 0 relay.
R/W These bits set the conditions for referring to the CAM
entry table 31. By setting multiple bits to 1, multiple
conditions can be selected.
POST313: The CAM entry table 31 is referred in port
0 reception.
POST312: The CAM entry table 31 is referred in port
0 to 1 relay.
POST311: The CAM entry table 31 is referred in port
1 reception.
POST310: The CAM entry table 31 is referred in port
1 to 0 relay.
Rev. 2.00 Dec. 07, 2005 Page 697 of 950
REJ09B0079-0200