SH7710 Datasheet, PDF (729/996 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Bit
Bit Name
23 to 20 POST23 to
POST20
Initial
Value
All 0
19 to 16 POST33 to All 0
POST30
15 to 12 POST43 to All 0
POST40
R/W
R/W
R/W
R/W
Section 18 Ethernet Controller (EtherC)
Description
These bits set the conditions for referring to the
CAM entry table 2. By setting multiple bits to 1,
multiple conditions can be selected.
POST23: The CAM entry table 2 is referred in port
0 reception.
POST22: The CAM entry table 2 is referred in port
0 to 1 relay.
POST21: The CAM entry table 2 is referred in port
1 reception.
POST20: The CAM entry table 2 is referred in port
1 to 0 relay.
These bits set the conditions for referring to the
CAM entry table 3. By setting multiple bits to 1,
multiple conditions can be selected.
POST33: The CAM entry table 3 is referred in port
0 reception.
POST32: The CAM entry table 3 is referred in port
0 to 1 relay.
POST31: The CAM entry table 3 is referred in port
1 reception.
POST30: The CAM entry table 3 is referred in port
1 to 0 relay.
These bits set the conditions for referring to the
CAM entry table 4. By setting multiple bits to 1,
multiple conditions can be selected.
POST43: The CAM entry table 4 is referred in port
0 reception.
POST42: The CAM entry table 4 is referred in port
0 to 1 relay.
POST41: The CAM entry table 4 is referred in port
1 reception.
POST40: The CAM entry table 4 is referred in port
1 to 0 relay.
Rev. 2.00 Dec. 07, 2005 Page 687 of 950
REJ09B0079-0200