SH7710 Datasheet, PDF (732/996 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Section 18 Ethernet Controller (EtherC)
Initial
Bit
Bit Name Value R/W Description
23 to 20 POST103 to All 0
POST100
R/W These bits set the conditions for referring to the CAM
entry table 10. By setting multiple bits to 1, multiple
conditions can be selected.
POST103: The CAM entry table 10 is referred in port
0 reception.
POST102: The CAM entry table 10 is referred in port
0 to 1 relay.
POST101: The CAM entry table 10 is referred in port
1 reception.
POST100: The CAM entry table 10 is referred in port
1 to 0 relay.
19 to 16 POST113 to All 0
POST110
R/W These bits set the conditions for referring to the CAM
entry table 11. By setting multiple bits to 1, multiple
conditions can be selected.
POST113: The CAM entry table 11 is referred in port
0 reception.
POST112: The CAM entry table 11 is referred in port
0 to 1 relay.
POST111: The CAM entry table 11 is referred in port
1 reception.
POST110: The CAM entry table 11 is referred in port
1 to 0 relay.
15 to 12 POST123 to All 0
POST120
R/W These bits set the conditions for referring to the CAM
entry table 12. By setting multiple bits to 1, multiple
conditions can be selected.
POST123: The CAM entry table 12 is referred in port
0 reception.
POST122: The CAM entry table 12 is referred in port
0 to 1 relay.
POST121: The CAM entry table 12 is referred in port
1 reception.
POST120: The CAM entry table 12 is referred in port
1 to 0 relay.
Rev. 2.00 Dec. 07, 2005 Page 690 of 950
REJ09B0079-0200