SH7710 Datasheet, PDF(570/996 Page) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

SH7710 Datasheet, PDF (570/996 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

◁

Section 15 Realtime Clock (RTC)

15.4.5 Crystal Oscillator Circuit

Crystal oscillator circuit constants (recommended values) are shown in table 15.2, and the RTC

crystal oscillator circuit in figure 15.5.

Table 15.2 Recommended Oscillator Circuit Constants (Recommended Values)

fosc

32.768 kHz

Cin

10 to 22 pF

Cout

10 to 22 pF

SH7710

Rf

EXTAL2

RD

XTAL2

XTAL

Cin

Cout

Notes: 1. Select either the Cin or Cout side for frequency adjustment variable capacitor

according to requirements such as frequency range, degree of stability, etc.

2. Built-in resistance value Rf (Typ value) = 10 Mâ¦, RD (Typ value) = 400 kâ¦

3. Cin and Cout values include stray capacitance due to the wiring. Take care when

using a ground plane.

4. The crystal oscillation settling time depends on the mounted circuit constants,

stray capacitance, etc., and should be decided after consultation with the crystal

resonator manufacturer.

5. Place the crystal resonator and load capacitors Cin and Cout as close as possible

to the chip.

(Correct oscillation may not be possible if there is externally induced noise in the

EXTAL2 and XTAL2 pins.)

6. Ensure that the crystal resonator connection pin (EXTAL2, XTAL2) wiring is

routed as far away as possible from other power lines (except GND) and signal

lines.

Figure 15.5 Example of Crystal Oscillator Circuit Connection

Rev. 2.00 Dec. 07, 2005 Page 528 of 950

REJ09B0079-0200

▷