SH7710 Datasheet, PDF (738/996 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Section 18 Ethernet Controller (EtherC)
Initial
Bit
Bit Name Value
23 to 20 POST263 to All 0
POST260
19 to 16 POST273 to All 0
POST270
15 to 12 POST283 to All 0
POST280
R/W Description
R/W These bits set the conditions for referring to the CAM
entry table 26. By setting multiple bits to 1, multiple
conditions can be selected.
POST263: The CAM entry table 26 is referred in port
0 reception.
POST262: The CAM entry table 26 is referred in port
0 to 1 relay.
POST261: The CAM entry table 26 is referred in port
1 reception.
POST260: The CAM entry table 26 is referred in port
1 to 0 relay.
R/W These bits set the conditions for referring to the CAM
entry table 27. By setting multiple bits to 1, multiple
conditions can be selected.
POST273: The CAM entry table 27 is referred in port
0 reception.
POST272: The CAM entry table 27 is referred in port
0 to 1 relay.
POST271: The CAM entry table 27 is referred in port
1 reception.
POST270: The CAM entry table 27 is referred in port
1 to 0 relay.
R/W These bits set the conditions for referring to the CAM
entry table 28. By setting multiple bits to 1, multiple
conditions can be selected.
POST283: The CAM entry table 28 is referred in port
0 reception.
POST282: The CAM entry table 28 is referred in port
0 to 1 relay.
POST281: The CAM entry table 28 is referred in port
1 reception.
POST280: The CAM entry table 28 is referred in port
1 to 0 relay.
Rev. 2.00 Dec. 07, 2005 Page 696 of 950
REJ09B0079-0200