SH7710 Datasheet, PDF (730/996 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Section 18 Ethernet Controller (EtherC)
Initial
Bit
Bit Name Value R/W Description
11 to 8 POST53 to All 0
POST50
R/W These bits set the conditions for referring to the CAM
entry table 5. By setting multiple bits to 1, multiple
conditions can be selected.
POST53: The CAM entry table 5 is referred in port 0
reception.
POST52: The CAM entry table 5 is referred in port 0
to 1 relay.
POST51: The CAM entry table 5 is referred in port 1
reception.
POST50: The CAM entry table 5 is referred in port 1
to 0 relay.
7 to 4
POST63 to All 0
POST60
R/W These bits set the conditions for referring to the CAM
entry table 6. By setting multiple bits to 1, multiple
conditions can be selected.
POST63: The CAM entry table 6 is referred in port 0
reception.
POST62: The CAM entry table 6 is referred in port 0
to 1 relay.
POST61: The CAM entry table 6 is referred in port 1
reception.
POST60: The CAM entry table 6 is referred in port 1
to 0 relay.
3 to 0
POST73 to All 0
POST70
R/W These bits set the conditions for referring to the CAM
entry table 7. By setting multiple bits to 1, multiple
conditions can be selected.
POST73: The CAM entry table 7 is referred in port 0
reception.
POST72: The CAM entry table 7 is referred in port 0
to 1 relay.
POST71: The CAM entry table 7 is referred in port 1
reception.
POST70: The CAM entry table 7 is referred in port 1
to 0 relay.
Rev. 2.00 Dec. 07, 2005 Page 688 of 950
REJ09B0079-0200