SH7710 Datasheet, PDF (733/996 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Section 18 Ethernet Controller (EtherC)
Initial
Bit
Bit Name Value
11 to 8 POST133 to All 0
POST130
7 to 4 POST143 to All 0
POST140
3 to 0 POST153 to All 0
POST150
R/W Description
R/W These bits set the conditions for referring to the CAM
entry table 13. By setting multiple bits to 1, multiple
conditions can be selected.
POST133: The CAM entry table 13 is referred in port 0
reception.
POST132: The CAM entry table 13 is referred in port 0
to 1 relay.
POST131: The CAM entry table 13 is referred in port 1
reception.
POST130: The CAM entry table 13 is referred in port 1
to 0 relay.
R/W These bits set the conditions for referring to the CAM
entry table 14. By setting multiple bits to 1, multiple
conditions can be selected.
POST143: The CAM entry table 14 is referred in port 0
reception.
POST142: The CAM entry table 14 is referred in port 0
to 1 relay.
POST141: The CAM entry table 14 is referred in port 1
reception.
POST140: The CAM entry table 14 is referred in port 1
to 0 relay.
R/W These bits set the conditions for referring to the CAM
entry table 15. By setting multiple bits to 1, multiple
conditions can be selected.
POST153: The CAM entry table 15 is referred in port 0
reception.
POST152: The CAM entry table 15 is referred in port 0
to 1 relay.
POST151: The CAM entry table 15 is referred in port 1
reception.
POST150: The CAM entry table 15 is referred in port 1
to 0 relay.
Rev. 2.00 Dec. 07, 2005 Page 691 of 950
REJ09B0079-0200