SH7710 Datasheet, PDF (735/996 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Initial
Bit
Bit Name Value
23 to 20 POST183 to All 0
POST180
19 to 16 POST193 to All 0
POST190
15 to 12 POST203 to All 0
POST200
Section 18 Ethernet Controller (EtherC)
R/W Description
R/W These bits set the conditions for referring to the CAM
entry table 18. By setting multiple bits to 1, multiple
conditions can be selected.
POST183: The CAM entry table 18 is referred in port
0 reception.
POST182: The CAM entry table 18 is referred in port
0 to 1 relay.
POST181: The CAM entry table 18 is referred in port
1 reception.
POST180: The CAM entry table 18 is referred in port
1 to 0 relay.
R/W These bits set the conditions for referring to the CAM
entry table 19. By setting multiple bits to 1, multiple
conditions can be selected.
POST193: The CAM entry table 19 is referred in port
0 reception.
POST192: The CAM entry table 19 is referred in port
0 to 1 relay.
POST191: The CAM entry table 19 is referred in port
1 reception.
POST190: The CAM entry table 19 is referred in port
1 to 0 relay.
R/W These bits set the conditions for referring to the CAM
entry table 20. By setting multiple bits to 1, multiple
conditions can be selected.
POST203: The CAM entry table 20 is referred in port
0 reception.
POST202: The CAM entry table 20 is referred in port
0 to 1 relay.
POST201: The CAM entry table 20 is referred in port
1 reception.
POST200: The CAM entry table 20 is referred in port
1 to 0 relay.
Rev. 2.00 Dec. 07, 2005 Page 693 of 950
REJ09B0079-0200