HD6417705F133V Datasheet, PDF (140/741 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7700 Series

3.6.3 Usage Examples
Invalidating Specific Entries: Specific TLB entries can be invalidated by writing 0 to the entry’s
V bit. R0 specifies the write data and R1 specifies the address.
; R0=H'1547 381C R1=H'F201 3000
; MMUCR.IX=0
; the V bit of way 0 of the entry selected by the VPN(16–12)=B'1 0011
; index is cleared to0,achieving invalidation.
MOV.L R0,@R1
Reading the Data of a Specific Entry: This example reads the data section of a specific TLB
entry. The bit order indicated in the data field in figure 3.14 (2) is read. R0 specifies the address
and the data section of a selected entry is read to R1.
; R0=H'F300 4300 VPN(16-12)=B'00100 Way 3
; MOV.L @R0,R1
3.7 Usage Note
The following operations should be performed in the P1 or P2 areas. In addition, when the P0, P3,
or U0 areas are accessed consecutively (this access includes instruction fetching), the instruction
code should be placed at least two instructions after the instruction that executes the following
operations.
1. Modification of SR.MD or SR.BL
2. Execution of the LDTLB instruction
3. Write to the memory-mapped TLB
4. Modification of MMUCR
5. Modification of PTEH.ASID
Rev. 2.00, 09/03, page 92 of 690