SH7144 Datasheet, PDF (286/773 Pages) Renesas Technology Corp – Hitachi SuperH RISC engine

Example of Cascaded Operation Setting Procedure: Figure 11.18 shows an example of the
setting procedure for cascaded operation.
Cascaded operation
Set cascading
[1]
Start count
[2]
[1] Set bits TPSC2 to TPSC0 in the channel 1
TCR to B'1111 to select TCNT_2 overflow/
underflow counting.
[2] Set the CST bit in TSTR for the upper and
lower channel to 1 to start the count
operation.
<Cascaded operation>
Figure 11.18 Cascaded Operation Setting Procedure
Examples of Cascaded Operation: Figure 11.19 illustrates the operation when TCNT_2
overflow/underflow counting has been set for TCNT_1 and phase counting mode has been
designated for channel 2.
TCNT_1 is incremented by TCNT_2 overflow and decremented by TCNT_2 underflow.
TCLKC
TCLKD
TCNT_2
TCNT_1
FFFD FFFE FFFF 0000 0001
0002
0001 0000 FFFF
0000
0001
0000
Figure 11.19 Example of Cascaded Operation
Rev. 2.0, 09/02, page 246 of 732