82801BA Datasheet, PDF (310/498 Pages) Intel Corporation – Intel 82801BA I/O Controller Hub 2 (ICH2) and Intel 82801BAM I/O Controller Hub 2 Mobile

LPC Interface Bridge Registers (D31:F0)
9.6.2.1
RTC_REGA—Register A
RTC Index:
Default Value:
Lockable:
0A
Undefined
No
Attribute:
Size:
Power Well:
R/W
8-bit
RTC
This register is used for general configuration of the RTC functions. None of the bits are affected
by RSMRST# or any other ICH2 reset signal.
Bit
Description
Update In Progress (UIP)—R/W. This bit may be monitored as a status flag.
7 ^{0 = The update cycle will not start for at least 492us. The time, calendar, and alarm information in}
RAM is always available when the UIP bit is 0.
1 = The update is soon to occur or is in progress.
Division Chain Select (DV[2:0])—R/W. These three bits control the divider chain for the oscillator,
and are not affected by RSMRST# or any other reset signal. DV[2] corresponds to bit 6.
010 = Normal Operation
11X = Divider Reset
6:4 ^{101 = Bypass 15 stages (test mode only)}
100 = Bypass 10 stages (test mode only)
011 = Bypass 5 stages (test mode only)
001 = Invalid
000 = Invalid
RS[3:0] Rate Select—R/W. Selects one of 13 taps of the 15 stage divider chain. The selected tap
can generate a periodic interrupt if the PIE bit is set in Register B. Otherwise this tap will set the PF
flag of Register C. If the periodic interrupt is not to be used, these bits should all be set to zero. RS3
corresponds to bit 3.
0000 = Interrupt never toggles
1000 = 3.90625 ms
0001 = 3.90625 ms
1001 = 7.8125 ms
3:0 _{0010 = 7.8125 ms}
1010 = 15.625 ms
0011 = 122.070 us
1011 = 31.25 ms
0100 = 244.141 us
1100 = 62.5 ms
0101 = 488.281 us
1101 = 125 ms
0110 = 976.5625 us
1110 = 250 ms
0111 = 1.953125 ms
1111= 500 ms
9-48
82801BA ICH2 and 82801BAM ICH2-M Datasheet