C8051F970-A-GM Datasheet, PDF (453/454 Pages) Silicon Laboratories – Low Power Capacitive Sensing MCU with up to 32 kB of Flash

C8051F97x
DOCUMENT CHANGE LIST
Revision 0.1 to Revision 1.0
Updated Capacitive Sense and ADC input channels listed on the front page.
Removed mention of the -I temperature grade from Figure 4.1, “C8051F97x Part Numbering,” on page 41.
Updated Digital Supply Current numbers in Table 1.2, “Global Electrical Characteristics,” on page 10 to
reflect the latest data.
Removed mention of 12-bit mode for ADC0.
Added a note to "17.1. ADC0 Analog Multiplexer" on page 105, the ADC0MX register, and all AMUX0
registers regarding disconnecting the AMUX0 when measuring an internal signal with the ADC.
Updated "24. Clocking Sources" on page 242 to mention that the external oscillator is not available on
QFN-24 (C8051F972/5) packages.
Updated "25. SmaRTClock (Real Time Clock, RTC0)" on page 254 references to RTC0CN at address 0x05
to correctly refer to RTC0XCN.
Updated "25. SmaRTClock (Real Time Clock, RTC0)" on page 254 to remove mention of using an external
CMOS clock with the SmaRTClock.
Updated port pins associated with the crystal pins on each package in Table 26.1, “Port I/O Assignment for
Analog Functions,” on page 280.
454
Rev 1.0