MMC2107 Datasheet, PDF (99/618 Pages) –

Freescale Semiconductor, Inc.
Chip Configuration Module (CCM)
Memory Map and Registers
The default function of the boot select can be overridden during reset
configuration. If the default mode is overridden, the CSEN bit in
CSCR0 bit reflects the boot device configuration.
MODE — Chip Configuration Mode Bit
The read-only MODE bit reflects the default chip configuration mode.
1 = Master mode
0 = Single-chip mode
The default mode can be overridden during reset configuration. If the
default mode is overridden, the MODE0 bit in CCR reflects the mode
configuration.
3.7.3.3 Chip Identification Register
The chip identification register (CIR) is a read-only register; writing to
CIR has no effect.
Address: 0x00c1_0006 and 0x00c1_0007
Bit 15
14
13
12
11
10
9
Bit 8
Read:
0
PIN7
0
PIN6
0
PIN5
1
PIN4
0
PIN3
1
PIN2
1
PIN1
1
PIN0
Write:
Reset: 0
0
0
1
0
1
1
1
Bit 7
6
5
4
3
2
1
Bit 0
Read:
0
PRN7
0
PRN6
0
PRN5
0
PRN4
0
PRN3
0
PRN2
0
PRN1
0
PRN0
Write:
Reset: 0
0
0
0
0
0
0
0
= Writes have no effect and the access terminates without a transfer error exception.
Figure 3-4. Chip Identification Register (CIR)
PIN[7:0] — Part Identification Number Field
This read-only field contains a unique identification number for the
part.
PRN[7:0] — Part Revision Number Field
This read-only field contains the full-layer mask revision number. This
number is increased by one for each new full-layer mask set of this
part. The revision numbers are assigned in chronological order.
MMC2107 – Rev. 2.0
MOTOROLA
Chip Configuration Module (CCM)
For More Information On This Product,
Go to: www.freescale.com
Technical Data
99