MMC2107 Datasheet, PDF (267/618 Pages) –

Freescale Semiconductor, Inc.
Edge Port Module (EPORT)
Memory Map and Registers
12.5.2.3 Edge Port Interrupt Enable Register
Address: 0x00c6_0003
Bit 7
6
5
4
3
2
1
Bit 0
Read:
EPIE7
Write:
EPIE6
EPIE5
EPIE4
EPIE3
EPIE2
EPIE1
EPIE0
Reset: 0
0
0
0
0
0
0
0
Figure 12-4. EPORT Port Interrupt Enable Register (EPIER)
EPIE[7:0] — Edge Port Interrupt Enable Bits
The read/write EPIE[7:0] bits enable EPORT interrupt requests. If a
bit in EPIER is set, EPORT generates an interrupt request when:
• The corresponding bit in the EPORT flag register (EPFR) is set
or later becomes set, or
• The corresponding pin level is low and the pin is configured for
level-sensitive operation
Clearing a bit in EPIER negates any interrupt request from the
corresponding EPORT pin. Reset clears EPIE[7:0].
1 = Interrupt requests from corresponding EPORT pin enabled
0 = Interrupt requests from corresponding EPORT pin disabled
MMC2107 – Rev. 2.0
MOTOROLA
Edge Port Module (EPORT)
For More Information On This Product,
Go to: www.freescale.com
Technical Data
267