MMC2107 Datasheet, PDF (154/618 Pages) –

Freescale Semiconductor, Inc.
Interrupt Controller Module
7.2 Introduction
The interrupt controller collects requests from multiple interrupt sources
and provides an interface to the processor core interrupt logic.
7.3 Features
Features of the interrupt controller module include:
• Up to 40 interrupt sources
• 32 unique programmable priority levels for each interrupt source
• Independent enable/disable of pending interrupts based on
priority level
• Select normal or fast interrupt request for each priority level
• Fast interrupt requests always have priority over normal interrupts
• Ability to mask interrupts at and below a defined priority level
• Ability to select between autovectored or vectored interrupt
requests
• Vectored interrupts generated based on priority level
• Ability to generate a separate vector number for normal and fast
interrupts
• Ability for software to self-schedule interrupts
• Software visibility of pending interrupts and interrupt signals to
core
• Asynchronous operation to support wakeup from low-power
modes
7.4 Low-Power Mode Operation
The interrupt controller is not affected by any low-power modes. All logic
between the input sources and generating the raw interrupt to the
M•CORE processor is combinational. This allows the M•CORE
processor to wake up during low-power stop mode when all system
clocks are stopped.
Technical Data
154
Interrupt Controller Module
For More Information On This Product,
Go to: www.freescale.com
MMC2107 – Rev. 2.0
MOTOROLA