MMC2107 Datasheet, PDF (46/618 Pages) –

Freescale Semiconductor, Inc.
General Description
– Queue pointers indicate current location for each queue
– Automated queue modes initiated by:
External edge trigger and gated trigger
Periodic/interval timer, within queued analog-to-digital
converter (QADC) module {queue1 and queue2}
Software command
– Single-scan or continuous-scan of queues
– Output data readable in three formats:
Right-justified unsigned
Left-justified signed
Left-justified unsigned
– Unused analog channels can be used as digital input/output
(I/O)
– Minimum pin set configuration implemented
• Interrupt controller:
– Up to 40 interrupt sources
– 32 unique programmable priority levels for each interrupt
source
– Independent enable/disable of pending interrupts based on
priority level
– Select normal or fast interrupt request for each priority level
– Fast interrupt requests always have priority over normal
interrupts.
– Ability to mask interrupts at and below a defined priority level
– Ability to select between autovectored or vectored interrupt
requests
– Vectored interrupts generated based on priority level
– Ability to generate a separate vector number for normal and
fast interrupts
– Ability for software to self-schedule interrupts
– Software visibility of pending interrupts and interrupt signals to
core
– Asynchronous operation to support wakeup from low-power
modes
Technical Data
46
General Description
For More Information On This Product,
Go to: www.freescale.com
MMC2107 – Rev. 2.0
MOTOROLA