MMC2107 Datasheet, PDF (298/618 Pages) –

Freescale Semiconductor, Inc.
Timer Modules (TIM1 and TIM2)
15.6 Signal Description
Table 15-1 provides an overview of the signal properties.
Table 15-1. Signal Properties
Name⁽¹⁾
Port
Function
Reset State Pullup
ICOC0 TIMPORT0 Channel 0 IC/OC pin
Pin state Active
ICOC1 TIMPORT1 Timer channel 1 IC/OC pin
Pin state Active
ICOC2 TIMPORT2 Timer channel 2 IC/OC pin
Pin state Active
ICOC3 TIMPORT3 Timer channel 3 IC/OC or PA pin Pin state Active
1. Pin signal names may change according to user requirements.
15.6.1 ICOC[2:0]
The ICOC[2:0] pins are for channel 2–0 input capture and output
compare functions. These pins are available for general-purpose
input/output (I/O) when not configured for timer functions.
15.6.2 ICOC3
The ICOC3 pin is for channel 3 input capture and output compare
functions or for the pulse accumulator input. This pin is available for
general-purpose I/O when not configured for timer functions.
15.7 Memory Map and Registers
See Table 15-2 for a memory map of the two timer modules. Timer 1 has
a base address of 0x00ce_0000. Timer 2 has a base address of
0x00cf_0000.
NOTE: Reading reserved or unimplemented locations returns 0s. Writing to
reserved or unimplemented locations has no effect.
Technical Data
298
Timer Modules (TIM1 and TIM2)
For More Information On This Product,
Go to: www.freescale.com
MMC2107 – Rev. 2.0
MOTOROLA