MMC2107 Datasheet, PDF (218/618 Pages) –

Freescale Semiconductor, Inc.
Non-Volatile Memory FLASH (CMFR)
Table 9-10 Erase Interlock State Descriptions (Continued)
State
Mode
Next
State
Transition Requirement
High voltage write enable: Erase margin
S1 T6 Write SES = 0 or a master reset
reads occur. CMFR accepts erase hardware
interlock write. Normal register accesses
(except CMFRMCR). CMFRMCR write
S3
causes NVM fuses to be cleared during the
high-voltage pulse. If CMFRMCR was
S4 T4 Write EHV = 1
written, a CMFRMCR read returns the NVM
fuses value. CMFRCTL write can change
EHV. When HVS goes high, NVR and
PAWS are locked.
Erase operation: High voltage applied to
array blocks to erase bitcells. Pulse-width
timer active if SCLKR[2:0] ≠ 0; HVS can be
S4 polled to time the erase pulse. During erase,
array cannot be accessed (bus error).
Normal register accesses. CMFRCTL write
can change only EHV.
S1 T7 Master reset
S5 T5 EHV = 0 and HVS = 0
Erase margin read operation: Reads
determine if bits in selected blocks need
S5
modification by the erase operation. Erased
bit reads as 1. All words in erased blocks
must be read to determine if erase is
complete.
S4 T8 Write EHV = 1
S1 T9 Write SES = 0 or a master reset
9.8.5.2 Erase Margin Reads
The CMFR provides an erase margin read with electrical margin for the
erase state. Erase margin reads provide sufficient margin to assure
specified data retention. The erase margin read is enabled when
SES = 1 and the erase write has occurred. The erase margin read and
subsequent on-page erase verify reads return a 0 for any bit that has not
completely erased. Bits that have completed erasing read as a 1s. To
increase the access time of the erase margin read, the off-page access
time is 17 clocks instead of the usual 2-clock off-page read access time.
The erase margin read occurs while doing an off-page read. All locations
within the block(s) that are being erased must read as a 1 to determine
that no more erase pulses are required.
Technical Data
218
Non-Volatile Memory FLASH (CMFR)
For More Information On This Product,
Go to: www.freescale.com
MMC2107 – Rev. 2.0
MOTOROLA