English
Language : 

MMC2107 Datasheet, PDF (201/618 Pages) –
Freescale Semiconductor, Inc.
Non-Volatile Memory FLASH (CMFR)
Registers and Memory Map
BLOCK[7:0] — Block Program and Erase Field
The read/write BLOCK[7:0] field selects array blocks for program or
erase operation. BLOCK[7:0] is writable when the SES bit is clear. If
SES is written in the same cycle with BLOCK[7:0] bits, the write
permission to BLOCK[7:0] bits depends on the previous value of SES.
Up to eight blocks at once can be selected for program operation.
Array blocks that correspond to 1s in BLOCK[7:0] are selected for
program or erase operation. The BLOCK[7:0] default state is $00, not
selected for program or erase.
1 = Array block selected for program or erase
0 = Array block not selected for program or erase
RSVD6 — Reserved
Reserved for test purposes. Writing to this read/write bit updates the
values and could affect functionality if set to 1.
ERASE — Program or Erase Select Bit
The read-always ERASE bit selects program or erase operations.
ERASE is writable when the SES bit is clear. If SES and ERASE are
written in the same cycle, the write permission to ERASE bit depends
on the previous value of SES.
When ERASE = 0, the array is configured for programming, and if
SES = 1 the SIE bit is write locked. When ERASE = 1, the array is
configured for erasing, and SES does not write lock the SIE bit.
1 = Erase operation
0 = Program operation
SES — Start/End Sequence Bit
The read-always SES bit signals the start and end of a program or
erase sequence. SES is writable when the HVS and EHV bits are
clear. If SES and EHV are written in the same cycle, the write
permission to SES depends on the previous value of EHV. At the start
of a program or erase sequence, SES is set, locking PROTECT[7:0],
BLOCK[7:0], and ERASE.
1 = CMFR configured for program or erase operation
0 = CMFR not configured for program or erase operation
NOTE:
SES does not lock the SCLKR[2:0], CLKPE[1:0], and CLKPM[6:0] bits.
Do not change these bits in software when SES = 1 unless
PAWS[2] = 1.
MMC2107 – Rev. 2.0
MOTOROLA
Non-Volatile Memory FLASH (CMFR)
For More Information On This Product,
Go to: www.freescale.com
Technical Data
201