HD6413007F20 Datasheet, PDF (424/798 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

11. Programmable Timing Pattern Controller (TPC)
11.2.3 Port B Data Direction Register (PBDDR)
PBDDR is an 8-bit write-only register that selects input or output for each pin in port B.
Bit
Initial value
Read/Write
7
6
5
4
3
2
1
0
PB₇ DDR PB₆ DDR PB₅ DDR PB₄ DDR PB₃ DDR PB₂ DDR PB₁ DDR PB₀ DDR
0
0
0
0
0
0
0
0
W
W
W
W
W
W
W
W
Port B data direction 7 to 0
These bits select input or
output for port B pins
Port B is multiplexed with pins TP₁₅ to TP₈. Bits corresponding to pins used for TPC output must
be set to 1. For further information about PBDDR, see section 8.8, Port B.
11.2.4 Port B Data Register (PBDR)
PBDR is an 8-bit readable/writable register that stores TPC output data for groups 2 and 3, when
these TPC output groups are used.
Bit
Initial value
Read/Write
7
PB ₇
0
R/(W)*
6
PB ₆
0
R/(W) *
5
PB ₅
0
R/(W)*
4
PB ₄
0
R/(W)*
3
PB ₃
0
R/(W)*
2
PB ₂
0
R/(W)*
1
PB ₁
0
R/(W)*
0
PB ₀
0
R/(W)*
Port B data 7 to 0
These bits store output data
for TPC output groups 2 and 3
Note: * Bits selected for TPC output by NDERB settings become read-only bits.
For further information about PBDR, see section 8.8, Port B.
Rev.5.00 Sep. 12, 2007 Page 394 of 764
REJ09B0396-0500