HD6413007F20 Datasheet, PDF (233/798 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

7. DMA Controller
Bit 3⎯Data Transfer Interrupt Enable (DTIE): Enables or disables the CPU interrupt (DEND)
requested when the DTE bit is cleared to 0.
Bit 3
DTIE
0
1
Description
The DEND interrupt requested by DTE is disabled
The DEND interrupt requested by DTE is enabled
(Initial value)
Bits 2 and 1⎯Data Transfer Select 2A and 1A (DTS2A, DTS1A): A channel operates in full
address mode when DTS2A and DTS1A are both set to 1.
Bit 0⎯Data Transfer Select 0A (DTS0A): Selects normal mode or block transfer mode.
Bit 0
DTS0A
0
1
Description
Normal mode
Block transfer mode
(Initial value)
Operations in these modes are described in sections 7.4.5, Normal Mode, and 7.4.6, Block
Transfer Mode.
Rev.5.00 Sep. 12, 2007 Page 203 of 764
REJ09B0396-0500