|
HD6413007F20 Datasheet, PDF (34/798 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series | |||
|
◁ |
1. Overview
Feature
Description
8-bit timer,
4 channels
⢠8-bit up-counter (external event count capability)
⢠Two time constant registers
⢠Two channels can be connected
Programmable ⢠Maximum 16-bit pulse output, using 16-bit timer as time base
timing pattern ⢠Up to four 4-bit pulse output groups (or one 16-bit group, or two 8-bit groups)
controller (TPC)
⢠Non-overlap mode available
⢠Output data can be transferred by DMAC
Watchdog
timer (WDT),
1 channel
⢠Internal reset signal can be generated by overflow
⢠Reset signal can be output externally
⢠Usable as an interval timer
Serial
communication
interface (SCI),
3 channels
⢠Selection of asynchronous or synchronous mode
⢠Full duplex: can transmit and receive simultaneously
⢠On-chip baud-rate generator
⢠Smart card interface functions added
A/D converter ⢠Resolution: 10 bits
⢠Eight channels, with selection of single or scan mode
⢠Variable analog conversion voltage range
⢠Sample-and-hold function
⢠A/D conversion can be started by an external trigger or 8-bit timer compare-
match
⢠DMAC can be activated by an A/D conversion end interrupt
D/A converter ⢠Resolution: 8 bits
⢠Two channels
⢠D/A outputs can be sustained in software standby mode
I/O ports
⢠35 input/output pins
⢠12 input-only pins
Rev.5.00 Sep. 12, 2007 Page 4 of 764
REJ09B0396-0500
|
▷ |