HD6413007F20 Datasheet, PDF (389/798 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

10. 8-Bit Timers
Bits 4 and 3⎯Counter Clear 1 and 0 (CCLR1, CCLR0): These bits specify the 8TCNT
clearing source. Compare match A or B, or input capture B, can be selected as the clearing source.
Bit 4 Bit 3
CCLR1 CCLR0 Description
0
0
Clearing is disabled
(Initial value)
1
Cleared by compare match A
1
0
Cleared by compare match B/input capture B
1
Cleared by input capture B
Note: When input capture B is set as the 8TCNT1 and 8TCNT3 counter clear source, 8TCNT0
and 8TCNT2 are not cleared by compare match B.
Bits 2 to 0⎯Clock Select 2 to 0 (CSK2 to CSK0): These bits select whether the clock input to
8TCNT is an internal or external clock.
Three internal clocks can be selected, all divided from the system clock (φ): φ/8, φ/64, and φ/8192.
The rising edge of the selected internal clock triggers the count.
When use of an external clock is selected, three types of count can be selected: at the rising edge,
the falling edge, and both rising and falling edges.
Rev.5.00 Sep. 12, 2007 Page 359 of 764
REJ09B0396-0500