HD64F3039F18 Datasheet, PDF (419/710 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8 Family / H8/300H Series

Section 12 Smart Card Interface
Bit 2—Smart Card Data Invert (SINV): Specifies inversion of the data logic level. This
function is used together with the SDIR bit for communication with an inverse convention card.
The SINV bit does not affect the logic level of the parity bit. For parity-related setting procedures,
see section 12.3.4, Register Settings.
Bit 2
SINV
0
1
Description
TDR contents are transmitted as they are
Receive data is stored as it is in RDR
TDR contents are inverted before being transmitted
Receive data is stored in inverted form in RDR
(Initial value)
Bit 1—Reserved: This bit cannot be modified and is always read as 1.
Bit 0—Smart Card Interface Mode Select (SMIF): This bit enables or disables the Smart Card
interface function.
Bit 0
SMIF
0
1
Description
Smart Card interface function is disabled
Smart Card interface function is enabled
(Initial value)
Rev.3.00 Mar. 26, 2007 Page 395 of 682
REJ09B0353-0300