HD64F3039F18 Datasheet, PDF (331/710 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8 Family / H8/300H Series

Section 9 Programmable Timing Pattern Controller
Bit 3—Group 3 Non-Overlap (G3NOV): Selects normal or non-overlapping TPC output for
group 3 (TP₁₅ to TP₁₂)*.
Note: * Since this LSI does not have a TP₁₄ pin, the TP₁₄ signal cannot be output off-chip.
Bit 3
G3NOV
0
1
Description
Normal TPC output in group 3 (output values change at compare match A in the
selected ITU channel)
(Initial value)
Non-overlapping TPC output in group 3 (independent 1 and 0 output at compare
match A and B in the selected ITU channel)
Bit 2—Group 2 Non-Overlap (G2NOV): Selects normal or non-overlapping TPC output for
group 2 (TP₁₁ to TP₈).
Bit 2
G2NOV
0
1
Description
Normal TPC output in group 2 (output values change at compare match A in the
selected ITU channel)
(Initial value)
Non-overlapping TPC output in group 2 (independent 1 and 0 output at compare
match A and B in the selected ITU channel)
Bit 1—Group 1 Non-Overlap (G1NOV): Selects normal or non-overlapping TPC output for
group 1 (TP₇ to TP₄).
Bit 1
G1NOV
0
1
Description
Normal TPC output in group 1 (output values change at compare match A in the
selected ITU channel)
(Initial value)
Non-overlapping TPC output in group 1 (independent 1 and 0 output at compare
match A and B in the selected ITU channel)
Rev.3.00 Mar. 26, 2007 Page 307 of 682
REJ09B0353-0300