HD64F3039F18 Datasheet, PDF (327/710 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8 Family / H8/300H Series

Section 9 Programmable Timing Pattern Controller
9.2.9 TPC Output Control Register (TPCR)
TPCR is an 8-bit readable/writable register that selects output trigger signals for TPC outputs on a
group-by-group basis.
Bit
Initial value
Read/Write
7
6
5
4
3
2
1
0
G3CMS1 G3CMS0 G2CMS1 G2CMS0 G1CMS1 G1CMS0 G0CMS1 G0CMS0
1
1
1
1
1
1
1
1
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Group 3 compare
match select 1 and 0
These bits select
the compare match _{Group 2 compare}
event that triggers _{match select 1 and 0}
TPC output group 3 _{These bits select}
(TP₁₅ to TP₁₂)*
the compare match
event that triggers
TPC output group 2
Group
match
1 compare
select 1 and
0
(TP₁₁ to TP₈)
These bits select
the compare match
event that triggers
Group 0 compare
match select 1 and 0
TPC output group 1 _{These bits select}
(TP₇ to TP₄)
the compare match
event that triggers
TPC output group 0
(TP₃ to TP₀)
Note: * Since this LSI does not have a TP₁₄ pin, the TP₁₄ signal cannot be output to the outside.
TPCR is initialized to H'FF by a reset and in hardware standby mode. It is not initialized in
software standby mode.
Rev.3.00 Mar. 26, 2007 Page 303 of 682
REJ09B0353-0300