HD64F3039F18 Datasheet, PDF (328/710 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8 Family / H8/300H Series

Section 9 Programmable Timing Pattern Controller
Bits 7 and 6—Group 3 Compare Match Select 1 and 0 (G3CMS1, G3CMS0): These bits
select the compare match event that triggers TPC output group 3 (TP₁₅ to TP₁₂)*.
Bit 7
G3CMS1
Bit6
G3CMS0
Description
0
0
TPC output group 3 (TP₁₅ to TP₁₂)* is triggered by compare match
in ITU channel 0
1
TPC output group 3 (TP₁₅ to TP₁₂)* is triggered by compare match
in ITU channel 1
1
0
TPC
output
group
3
(TP
15
to
TP₁₂)*
is
triggered
by
compare
match
in ITU channel 2
1
TPC output group 3 (TP₁₅ to TP₁₂)* is triggered by compare match
in ITU channel 3
(Initial value)
Note: * Since this LSI does not have a TP₁₄ pin, the TP₁₄ signal cannot be output off-chip.
Bits 5 and 4—Group 2 Compare Match Select 1 and 0 (G2CMS1, G2CMS0): These bits
select the compare match event that triggers TPC output group 2 (TP₁₁ to TP₈).
Bit 5
G2CMS1
0
1
Bit4
G2CMS0
0
1
0
1
Description
TPC output group 2 (TP₁₁ to TP₈) is triggered by compare match in
ITU channel 0
TPC output group 2 (TP to TP ) is triggered by compare match in
11
8
ITU channel 1
TPC output group 2 (TP₁₁ to TP₈) is triggered by compare match in
ITU channel 2
TPC output group 2 (TP₁₁ to TP₈) is triggered by compare match in
ITU channel 3
(Initial value)
Rev.3.00 Mar. 26, 2007 Page 304 of 682
REJ09B0353-0300