HD64F3039F18 Datasheet, PDF (315/710 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8 Family / H8/300H Series

Section 9 Programmable Timing Pattern Controller
Section 9 Programmable Timing Pattern Controller
9.1 Overview
The H8/3039 Group has a built-in programmable timing pattern controller (TPC)* that provides
pulse outputs by using the 16-bit integrated timer-pulse unit (ITU) as a time base. The TPC pulse
outputs are divided into 4-bit groups (group 3 to group 0) that can operate simultaneously and
independently.
9.1.1 Features
TPC features are listed below.
• 15-bit output data
Maximum 15-bit data can be output. TPC output can be enabled on a bit-by-bit basis.
• Four output groups and one 3-bit output.
Output trigger signals can be selected in 4-bit groups to provide up to three different 4-bit
outputs and one 3-bit output.
• Selectable output trigger signals
Output trigger signals can be selected for each group from the compare-match signals of four
ITU channels.
• Non-overlap mode
A non-overlap margin can be provided between pulse outputs.
Note: * Note that since this LSI does not have a TP₁₄ pin, it is a 15-bit programmable timing
pattern controller (TPC).
Rev.3.00 Mar. 26, 2007 Page 291 of 682
REJ09B0353-0300