MC9S12T64 Datasheet, PDF (432/608 Pages) Motorola, Inc – Specification

Freescale Semiconductor, Inc.
Serial Communications Interface (SCI)
SCI Status Register Where: x = 0 for SCI0, or 1 for SCI1
2 (SCIxSR2)
Address Offset: $00CD (SCI0SR2), $00D5 (SCI1SR2)
Bit 7
6
5
4
Read:
0
0
0
0
Write:
Reset:
0
0
0
0
3
2
1
Bit 0
0
RAF
BRK13
TXDIR
0
0
0
0
= Unimplemented or Reserved
Read: anytime
Write: anytime; writing accesses SCI status register 2; writing to any bits
except TXDIR and BRK13 has no effect
BRK13 — Break Transmit character length
This bit determines whether the transmit break character is 10 or 11
bit respectively 13 or 14 bits long. The detection of a framing error is
not affected by this bit.
1 = Break character is 13 or 14 bit long
0 = Break Character is 10 or 11 bit long
TXDIR — Transmitter pin data direction in Single-Wire mode.
This bit determines whether the TxD pin is going to be used as an
input or output, in the Single-Wire mode of operation. This bit is only
relevant in the Single-Wire mode of operation.
1 = TxD pin to be used as an output in Single-Wire mode
0 = TxD pin to be used as an input in Single-Wire mode
RAF — Receiver Active Flag
RAF is set when the receiver detects a logic 0 during the RT1 time
period of the start bit search. RAF is cleared when the receiver
detects an idle character.
1 = Reception in progress
0 = No reception in progress
MC9S12T64Revision 1.1.1
Serial Communications Interface (SCI)
For More Information On This Product,
Go to: www.freescale.com