MC9S12T64 Datasheet, PDF (269/608 Pages) Motorola, Inc – Specification

Port T
Port S
Port P
Freescale Semiconductor, Inc.
Port Integration Module (PIM)
Low Power Options
This port is associated with the Enhanced Capture Timer module. In all
modes, port T pins PT[7:0] can be used for either general-purpose I/O,
or with the channels of the Enhanced Capture Timer. During reset, port
T pins are configured as high-impedance inputs.
This port is associated with the serial SCI and SPI modules. In all modes,
port S pins PS[7:0] can be used either for general-purpose I/O, or with
the SCI and SPI subsystems. During reset, port S pins are configured as
inputs with pull-up.
This port is associated with the PWM module. In all modes, port P pins
PP[7:0] can be used for either general purpose I/O or with the PWM
subsystem. If the PWM is enabled the pins become PWM output
channels with the exception of pin 7 which can be PWM input or output.
During reset, port P pins are configured as high-impedance inputs.
Low Power Options
Run Mode
No low power options exist for this module in run mode.
Wait Mode
No low power options exist for this module in wait mode.
Stop Mode
All clocks are stopped.
Reset Initialization
All registers including the data registers get set/reset asynchronously.
Port Integration Module (PIM)
For More Information On This Product,
Go to: www.freescale.com
MC9S12T64Revision 1.1.1