HD6432633 Datasheet, PDF (964/1453 Pages) Renesas Technology Corp – Series of Microcomputers (MCUs: microcomputer units)

Bit 1—Erase 1 (E1): Selects erase mode transition or clearing. Do not set the SWE1, ESU1,
PSU1, EV1, PV1, or P1 bit at the same time.
Bit 1
E1
0
1
Description
Erase mode cleared
Transition to erase mode
[Setting condition]
When FWE = 1, SWE1 = 1, and ESU1 = 1
(Initial value)
Bit 0—Program 1 (P1): Selects program mode transition or clearing. Do not set the SWE1,
PSU1, ESU1, EV1, PV1, or E1 bit at the same time.
Bit 0
P1
0
1
Description
Program mode cleared
Transition to program mode
[Setting condition]
When FWE = 1, SWE1 = 1, and PSU1 = 1
(Initial value)
22.5.2 Flash Memory Control Register 2 (FLMCR2)
Bit: 7
6
5
4
3
2
1
0
FLER
—
—
—
—
—
—
—
Initial value: 0
0
0
0
0
0
0
0
R/W: R
—
—
—
—
—
—
—
Note: FLMCR2 is a read-only register, and should not be written to.
FLMCR2 is an 8-bit register used for flash memory operating mode control. FLMCR2 is
initialized to H'00 by a power-on reset, and in hardware standby mode and software standby mode.
When on-chip flash memory is disabled, a read will return H'00.
910