English
Language : 

HD6432633 Datasheet, PDF (1068/1453 Pages) Renesas Technology Corp – Series of Microcomputers (MCUs: microcomputer units)
◁
Item
Symbol Min Typ
Max
Unit Test Conditions
Port power Operating PICC
— 17
25
mA
supply
PVCC = 5.0 V
current*2
Subclock
operation
——
50
µA
Standby
Watch mode
Analog
During A/D AlCC
power supply and D/A
current
conversion
— 0.01
——
— 0.6
5.0
Ta ≤ 50 °C
20
50 °C < Ta
2.0
mA AVCC = 5.0 V
Idle
Reference During A/D AlCC
power supply and D/A
current
conversion
— 0.01
5.0
Ta = 25 °C
— 4.0
5.0
µA
mA Vref = 5.0 V
Idle
— 0.01
5.0
µA
Ta = 25 °C
RAM standby voltage*3 VRAM
2.0 —
—
V
Notes: *1 If the A/D and D/A converters are not used, do not leave the AVCC, Vref, and AVSS pins
open. Apply a voltage between 3.3 V and 5.5 V to the AVCC and Vref pins by connecting
them to PVCC, for instance. Set Vref ≤ AVCC.
*2 Current dissipation values are for VIH = VCC (EXTAL, OSC1), AVCC (ports 4 and 9), or
PVCC (other), and VIL = 0 V, with all output pins unloaded and the on-chip MOS pull-up
transistors in the off state.
*3 The values are for VRAM ≤ VCC < 3.0 V, VIH min = VCC – 0.1 V, and VIL max = 0.1 V.
*4 ICC depends on VCC and f as follows:
ICC max = 1.0 (mA) + 0.93 (mA/(MHz × V)) × VCC × f (normal operation)
ICC max = 1.0 (mA) + 0.77 (mA/(MHz × V)) × VCC × f (sleep mode)
*5 The FWE pin is used only in the flash memory version.
1014
 ▷