HD6432633 Datasheet, PDF (320/1453 Pages) Renesas Technology Corp – Series of Microcomputers (MCUs: microcomputer units)

Bits 13 and 12—Reserved: Can be read or written to.
Bits 11 and 9—Data Transfer Acknowledge (DTA): These bits enable or disable clearing, when
DMA transfer is performed, of the internal interrupt source selected by the data transfer factor
setting.
When DTE = 1 and DTA = 1, the internal interrupt source selected by the data transfer factor
setting is cleared automatically by DMA transfer. When DTE = 1 and DTA = 1, the internal
interrupt source selected by the data transfer factor setting does not issue an interrupt request to the
CPU or DTC.
When the DTE = 1 and the DTA = 0, the internal interrupt source selected by the data transfer
factor setting is not cleared when a transfer is performed, and can issue an interrupt request to the
CPU or DTC in parallel. In this case, the interrupt source should be cleared by the CPU or DTC
transfer.
When the DTE = 0, the internal interrupt source selected by the data transfer factor setting issues
an interrupt request to the CPU or DTC regardless of the DTA bit setting.
The state of the DTME bit does not affect the above operations.
Bit 11—Data Transfer Acknowledge 1 (DTA1): Enables or disables clearing, when DMA
transfer is performed, of the internal interrupt source selected by the channel 1 data transfer factor
setting.
Bit 11
DTA1
0
1
Description
Clearing of selected internal interrupt source at time of DMA transfer is disabled
(Initial value)
Clearing of selected internal interrupt source at time of DMA transfer is enabled
Bit 9—Data Transfer Acknowledge 0 (DTA0): Enables or disables clearing, when DMA
transfer is performed, of the internal interrupt source selected by the channel 0 data transfer factor
setting.
Bit 9
DTA0
0
1
Description
Clearing of selected internal interrupt source at time of DMA transfer is disabled
(Initial value)
Clearing of selected internal interrupt source at time of DMA transfer is enabled
266