HD6432633 Datasheet, PDF (1108/1453 Pages) Renesas Technology Corp – Series of Microcomputers (MCUs: microcomputer units)

Item
Symbol Min Typ
Max
Unit Test Conditions
Analog
During A/D Al_CC
power supply and D/A
current
conversion
— 0.6
2.0
mA AV_CC = 5.0 V
Idle
— 0.1
5.0
µA
Ta = 25°C
Reference During A/D Al_CC
power supply and D/A
current
conversion
— 4.0
5.0
mA V_ref = 5.0 V
Idle
— 0.1
5.0
µA
Ta = 25°C
RAM standby voltage*³ V_RAM
2.0 —
—
V
Notes: *1 If the A/D and D/A converters are not used, do not leave the AV_CC, V_ref, and AV_SS pins
open. Apply a voltage between 3.3 V and 5.5 V to the AV_CC and V_ref pins by connecting
them to PV_CC, for instance. Set V_ref ≤ AV_CC.
*2 Current dissipation values are for V_IH = PV_CC (EXTAL), AV_CC (ports 4 and 9), or PV_CC
(other), and V_IL = 0 V, with all output pins unloaded and the on-chip MOS pull-up
transistors in the off state.
*3 The values are for V_RAM ≤ PV_CC < 3.0 V, V_IH min = PV_CC – 0.1 V, and V_IL max = 0.1 V.
*4 I_CC depends on PV_CC and f as follows:
I_CC max = 15 (mA) + 0.45 (mA/(MHz × V)) × PV_CC × f (normal operation)
I_CC max = 15 (mA) + 0.4 (mA/(MHz × V)) × PV_CC × f (sleep mode)
*5 The FWE pin is used only in the flash memory version.
1054