HD6432633 Datasheet, PDF (207/1453 Pages) Renesas Technology Corp – Series of Microcomputers (MCUs: microcomputer units)

Section 6 PC Break Controller (PBC)
(This function is not available in the H8S/2695)
6.1 Overview
The PC break controller (PBC) provides functions that simplify program debugging. Using these
functions, it is easy to create a self-monitoring debugger, enabling programs to be debugged with
the chip alone, without using an in-circuit emulator. Four break conditions can be set in the PBC:
instruction fetch, data read, data write, and data read/write.
6.1.1 Features
The PC break controller has the following features:
• Two break channels (A and B)
• The following can be set as break compare conditions:
 24 address bits
Bit masking possible
 Bus cycle
Instruction fetch
Data access: data read, data write, data read/write
 Bus master
Either CPU or CPU/DTC can be selected
• The timing of PC break exception handling after the occurrence of a break condition is as
follows:
 Immediately before execution of the instruction fetched at the set address (instruction fetch)
 Immediately after execution of the instruction that accesses data at the set address (data
access)
• Module stop mode can be set
 The initial setting is for PBC operation to be halted. Register access is enabled by clearing
module stop mode.
153