HD6432633 Datasheet, PDF (705/1453 Pages) Renesas Technology Corp – Series of Microcomputers (MCUs: microcomputer units)

13.6.4 Contention between Compare Matches A and B
If compare match events A and B occur at the same time, the 8-bit timer operates in accordance
with the priorities for the output statuses set for compare match A and compare match B, as shown
in table 13-4.
Table 13-4 Timer Output Priorities
Output Setting
Toggle output
1 output
0 output
No change
Priority
High
Low
13.6.5 Switching of Internal Clocks and TCNT Operation
TCNT may increment erroneously when the internal clock is switched over. Table 13-5 shows the
relationship between the timing at which the internal clock is switched (by writing to the CKS1
and CKS0 bits) and the TCNT operation.
When the TCNT clock is generated from an internal clock, the falling edge of the internal clock
pulse is detected. If clock switching causes a change from high to low level, as shown in case 3 in
table 13-5, a TCNT clock pulse is generated on the assumption that the switchover is a falling
edge. This increments TCNT.
The erroneous incrementation can also happen when switching between internal and external
clocks.
651