HD6432633 Datasheet, PDF (57/1453 Pages) Renesas Technology Corp – Series of Microcomputers (MCUs: microcomputer units)

Item
Specification
Data transfer
controller (DTC)*¹
• Can be activated by internal interrupt or software
• Multiple transfers or multiple types of transfer possible for one activation
source
• Transfer possible in repeat mode, block transfer mode, etc.
• Request can be sent to CPU for interrupt that activated DTC
16-bit timer-pulse
unit (TPU)
• 6-channel 16-bit timer on-chip
• Pulse I/O processing capability for up to 16 pins'
• Automatic 2-phase encoder count capability
Programmable
pulse generator
(PPG)
• Maximum 16-bit pulse output possible with TPU as time base
• Output trigger selectable in 4-bit groups
• Non-overlap margin can be set
• Direct output or inverse output setting possible
8-bit timer*¹
4 channels
• 8-bit up counter (external event count possible)
• Time constant register × 2
• 2 channel connection possible
Watchdog timer
2 channels*²
• Watchdog timer or interval timer selectable
• Operation using sub-clock supported (WDT1 only)
14-bit PWM timer
(PWM)*¹
• Maximum of 4 outputs
• Resolution: 1/16384
• Maximum carrier frequency: 390.6 kHz (operating at 25 MHz),
437.6 kHz (operating at 28 MHz)
Serial
communication
interface (SCI)
5 channels
(SCI0 to SCI4)
• Asynchronous mode or synchronous mode selectable
• Multiprocessor communication function
• Smart card interface function
IrDA-equipped SCI*¹ _{• Supports IrDA standard version 1.0}
1 channel (SCI0) _{• TxD and RxD encoding/decoding in IrDA format}
• Start/stop synchronization mode or clock synchronization mode selectable
• Multiprocessor communications function
• Smart card interface function
Notes: *1 This function is not available in the H8S/2695.
*2 The watchdog timer in the H8S/2695 has one channel only.
3