HD6432633 Datasheet, PDF (756/1453 Pages) Renesas Technology Corp – Series of Microcomputers (MCUs: microcomputer units)

Bits 1 and 0—Clock Select 1 and 0 (CKS1, CKS0): These bits select the clock source for the
baud rate generator. The clock source can be selected from ø, ø/4, ø/16, and ø/64, according to the
setting of bits CKS1 and CKS0.
For the relation between the clock source, the bit rate register setting, and the baud rate, see
section 16.2.8, Bit Rate Register (BRR).
Bit 1
CKS1
0
1
Bit 0
CKS0
0
1
0
1
Description
ø clock
ø/4 clock
ø/16 clock
ø/64 clock
(Initial value)
16.2.6 Serial Control Register (SCR)
Bit
:
Initial value :
R/W
:
7
TIE
0
R/W
6
5
RIE
TE
0
0
R/W R/W
4
3
2
1
0
RE MPIE TEIE CKE1 CKE0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
SCR is a register that performs enabling or disabling of SCI transfer operations, serial clock output
in asynchronous mode, and interrupt requests, and selection of the serial clock source.
SCR can be read or written to by the CPU at all times.
SCR is initialized to H'00 by a reset and in standby mode.
Bit 7—Transmit Interrupt Enable (TIE): Enables or disables transmit data empty interrupt
(TXI) request generation when serial transmit data is transferred from TDR to TSR and the TDRE
flag in SSR is set to 1.
Bit 7
TIE
Description
0
Transmit data empty interrupt (TXI) requests disabled
(Initial value)
1
Transmit data empty interrupt (TXI) requests enabled
Note: TXI interrupt request cancellation can be performed by reading 1 from the TDRE flag, then
clearing it to 0, or clearing the TIE bit to 0.
702