HD6432633 Datasheet, PDF (873/1453 Pages) Renesas Technology Corp – Series of Microcomputers (MCUs: microcomputer units)

Bit 0—Start Condition/Stop Condition Prohibit (SCP): Controls the issuing of start and stop
conditions in master mode. To issue a start condition, write 1 in BBSY and 0 in SCP. A retransmit
start condition is issued in the same way. To issue a stop condition, write 0 in BBSY and 0 in SCP.
This bit is always read as 1. If 1 is written, the data is not stored.
Bit 0
SCP
0
1
Description
Writing 0 issues a start or stop condition, in combination with the BBSY flag
Reading always returns a value of 1
(Initial value)
Writing is ignored
18.2.6 I²C Bus Status Register (ICSR)
Bit
:
Initial value :
R/W
:
7
ESTP
0
R/(W)*
6
STOP
0
R/(W)*
5
IRTR
0
R/(W)*
4
AASX
0
R/(W)*
3
AL
0
R/(W)*
2
AAS
0
R/(W)*
1
ADZ
0
R/(W)*
0
ACKB
0
R/W
Note: * Only 0 can be written, for flag clearing.
ICSR is an 8-bit readable/writable register that performs flag confirmation and acknowledge
confirmation and control.
ICSR is initialized to H'00 by a reset and in hardware standby mode.
819