HD6432633 Datasheet, PDF (776/1453 Pages) Renesas Technology Corp – Series of Microcomputers (MCUs: microcomputer units)

MSTPCRB and MSTPCRC are initialized to H'FF by a power-on reset and in hardware standby
mode. They are not initialized by a manual reset and in software standby mode.
(1) Module Stop Control Register B (MSTPCRB)
Bit 7—Module Stop (MSTPB7): Specifies the SCI0 module stop mode.
Bit 7
MSTPB7
0
1
Description
SCI0 module stop mode is cleared
SCI0 module stop mode is set
(Initial value)
Bit 6—Module Stop (MSTPB6): Specifies the SCI1 module stop mode.
Bit 6
MSTPB6
0
1
Description
SCI1 module stop mode is cleared
SCI1 module stop mode is set
(Initial value)
Bit 5—Module Stop (MSTPB5): Specifies the SCI2 module stop mode.
Bit 5
MSTPB5
0
1
Description
SCI2 module stop mode is cleared
SCI2 module stop mode is set
(Initial value)
(2) Module Stop Control Register C (MSTPCRC)
Bit 7—Module Stop (MSTPC7): Specifies the SCI3 module stop mode.
Bit 7
MSTPC7
0
1
Description
SCI3 module stop mode is cleared
SCI3 module stop mode is set
(Initial value)
722