HD6432633 Datasheet, PDF (599/1453 Pages) Renesas Technology Corp – Series of Microcomputers (MCUs: microcomputer units)

Bit 3—Input Capture/Output Compare Flag D (TGFD): Status flag that indicates the
occurrence of TGRD input capture or compare match in channels 0 and 3.
In channels 1, 2, 4, and 5, bit 3 is reserved. It is always read as 0 and cannot be modified.
Bit 3
TGFD
Description
0
[Clearing conditions]
(Initial value)
• When DTC* is activated by TGID interrupt while DISEL bit of MRB in DTC* is 0
• When 0 is written to TGFD after reading TGFD = 1
1
[Setting conditions]
• When TCNT = TGRD while TGRD is functioning as output compare register
• When TCNT value is transferred to TGRD by input capture signal while TGRD is
functioning as input capture register
Note: * This function is not available in the H8S/2695.
Bit 2—Input Capture/Output Compare Flag C (TGFC): Status flag that indicates the
occurrence of TGRC input capture or compare match in channels 0 and 3.
In channels 1, 2, 4, and 5, bit 2 is reserved. It is always read as 0 and cannot be modified.
Bit 2
TGFC
Description
0
[Clearing conditions]
(Initial value)
• When DTC* is activated by TGIC interrupt while DISEL bit of MRB in DTC* is 0
• When 0 is written to TGFC after reading TGFC = 1
1
[Setting conditions]
• When TCNT = TGRC while TGRC is functioning as output compare register
• When TCNT value is transferred to TGRC by input capture signal while TGRC is
functioning as input capture register
Note: * This function is not available in the H8S/2695.
545